SAE 100R3 medium pressure hydraulic hose is ideal for medium pressure fuel and oil lines as well as return and suction hoses of hydraulic systems. Two plies of braided textile protect the inner tube in case that the outside cover is broken. Nitrile tube has premium oil resistant and won’t react with petroleum- or water-based hydraulic fluids within -40°C to 100°C.
SAE 100R3 hose should be used with petroleum- and water-based hydraulic fluids, within a temperature range from 140° to 100° C. It is constructed with an inner tube of oil-resistant synthetic rubber, two braids of suitable textile yarn, and an oil- and weather-resistant synthetic rubber cover.
Tube: black nitrile;
Cover: black neoprene (MSHA approved);
Reinforcement: two plies of braided textile;
Max working pressure: 1520psi (at 3/16″ I.D.);
Working temperature: -40°F to 212°F (-40°C to 100°C);
Inside diameter: 3-16″ to 1-1/4″;
Min bend radius: 75mm at 3/16″ I.D.;
Pressure grade: medium;
Safety factor: 4:1.
This hose shall consist of an inner tube of oil resistant synthetic rubber,two braids of suitable fiber,and an oil and weather resistant synthetic rubber cover.
Recommended for: Petroleum and water based hydraulic fluids, anti-freeze and water. Meets or exceeds requirements of SAE 100R3.
|Part Number||Hose Size ID||Hose OD||Max. Working Pressure||Min. Bend Radius||Min. Burst Pressure||Weight|
|(In)||(DIN Dash Size)||(In)||(mm)||(PSI)||MPA||(In)||(mm)||(PSI)||MPA||(lbs/ft)|
Features of SAE 100R3 NRP 2-Textile Braid medium pressure hydraulic hose
Tube: Co-extruded tube, Urethane and Nylon
Reinforcement: Braided synthetic fiber
Cover: Orange non-perforated polyurethane
Sizes: -04, -06, -08, -12, -16
Fittings: Synflex (903, 90A, 9C6), Polyon, TTC/Z-Series with sleeve, and U-Series (-04, -06, -12, -16)
Meets or exceeds SAE 100R7 specifications
Non-conductive for use where potential electrical shock is possible
Maximum operating pressure: 69 to 192 bar (1,000 to 2,800 psi)
Temperature range: -40˚C to +100˚C (-40˚F to +212˚F)
Low volumetric expansion – less than +/- 2%
SAE J517 non-conductive hose construction
<50 micro-amperes leakage when subjected to 75,000 volts/ft. for five minutes
Low pressure, textile reinforced hose for petroleumor water-based hydraulic fluids or pneumatic applications. Not to be used for air brake.
Meets or exceeds the performance requirements of: SAE 100R3/EN 854 R3.
Meets Flame Resistance USMSHA Designation